Mokslinės informacijos instituto duomenų bazių Web of Science, MEDLINE, Scopus mokslo žurnaluose

Determination of river hydromorphological features in low-2 land rivers from aerial imagery and direct measurements using 3 machine learning algorithms

Vytautas Akstinas, Andrius Kriščiūnas, Arminas Šidlauskas, Dalia Čalnerytė, Diana Meilutytė-Lukauskienė, Darius Jakimavičius, Tautvydas Fyleris, Serhii Nazarenko, Rimantas Barauskas.

DOI

Approach of AI-Based Automatic Climate Control in White Button Mushroom Growing Hall

Rimantas Barauskas, Andrius Krišciunas, Dalia Calneryte, Paulius Pilipavicius, Tautvydas Fyleris, Vytautas Daniulaitis and Robertas Mikalauskis.

DOI

Finite Element Analysis of Heat and Mass Exchange Between Human Skin and Textile Structures

Aušra GADEIKYTĖ, Donatas SANDONAVIČIUS, Vidmantas RIMAVIČIUS, Rimantas BARAUSKAS.

DOI

Urban Change Detection from Aerial Images Using Convolutional Neural Networks and Transfer Learning

Tautvydas Fyleris, Andrius Krišciunas, Valentas Gružauskas, Dalia Calneryte and Rimantas Barauskas.

DOI

Prediction of air permeability coefficient and water-vapor resistance of 3D textile layer

Ausra Gadeikyte, Ausra Abraitiene and Rimantas Barauskas.

DOI

Investigation of influence of forced ventilation through 3D textile on heat exchange properties of the textile layer

Aušra Gadeikytė, Rimantas Barauskas.

DOI

Investigation of thermal properties of spacer fabrics with phase changing material by finite element model and experiment

Rimantas Barauskas, Audrone Sankauskaite, Vitalija Rubeziene, Ausra Gadeikyte, Virginija Skurkyte-Papieviene and Ausra Abraitiene.

DOI

Synthesis of highly convergent 2D and 3D finite elements for short acoustic wave simulation

Dalia Čalneryte, Andrius Kriščiunas, Rimantas Barauskas.

Wave Motion 94 (2020) 102515

DOI

Fast GPU simulation of reinforced concrete at the scale of reinforcement ribs by the discrete element method

R. PACEVIČ, R. KAČIANAUSKAS, A. KAČENIAUSKAS, G. KAKLAUSKAS, R. BARAUSKAS.

ARCHIVES OF MECHANICS 71 (4–5), 459–488, 2019, DOI: 10.24423/aom.3148

DOI

Finite element analysis of resonant properties of silicon nanowires

Čalnerytė, Dalia; Rimavičius, Vidmantas; Barauskas, Rimantas.

2019, vol. 230, iss. 5, p. 1907-1917

Acta mech 2018, FEM analysis of resonant properties of silicon nanowires.pdfDOI

Analysis of knitted fabrics deformations non-uniformity

Inga Audzevičiūtė-Liutkienė, Vitalija Masteikaitė, Milda Jucienė, Virginija Sacevičienė, Rimantas Barauskas, Saulius Diliūnas.

2019, vol. 110, iss. 7, p. 1051-1058

J Textile Inst 2018,Analysis of knitted.pdfDOI

Model based ultrasonic measurement technique for evaluation of the adhesive properties

Dobilas Liaukonis, Liudas Mazeika, Rimantas Barauskas, Audrius Neciunas.

2018, vol. 24, iss. 5, p. 36-41

Elektronika&Elektrotechnika_ 5(24) 2018.pdf

Calculating dispersion relations for waveguide immersed in perfect fluid

Audrius Nečiūnas, Martynas Patašius, Rimantas Barauskas.

2018, Vol. 23, iss. 2, p. 309-326

Proc ICIST 2015, Neciunas,Barauskas,KersieneDOI

Investigation of the thermal properties of spacer fabrics with bio-ceramic additives using the finite element model and experiment

Rimantas Barauskas, Audronė Sankauskaitė, Aušra Abraitienė.

2018, Vol. 88, iss. 3, p. 293-311

ProcIT_2010_16th(Kaunas) 2010DOI

Multi-scale finite element modeling of 3D printed structures subjected to mechanical loads

Dalia Čalnerytė, Rimantas Barauskas, Daiva Milašienė, Rytis Maskeliūnas, Audrius Nečiūnas, Armantas Ostreika, Martynas Patašius, Andrius Kriščiūnas.

2018, Vol. 24, iss. 1, p. 177-187

Journal of Micro/Nanolitography, MEMS and MOEMS, 2012, Vol. 11, iss. 3DOI

Detection and correction of the controlled object transfer function in the smart home control system

Rimantas Barauskas, Valdas Grigaliūnas, Marius Gudauskis, Linas Obcarskas, Kastytis Kiprijonas Šarkauskas, Andrius Vilkauskas, Arūnas Žvironas.

2017, Vol. 23, iss. 1, p. 3-9

Elektronika&Elektrotechnika_ 1(23) 2017.pdfDOI

Error modelling of optical encoders based on Moiré effect

Algimantas Barakauskas, Rimantas Barauskas, Albinas Kasparaitis, Saulius Kaušinis, Aurimas Jakštas.

2017, Vol. 19, iss. 1, p. 38-48

J.of Vibroengineering, Feb 2017, vol.19, Issue 1DOI

Elastic wave simulation based on modal excitation in 3D medium

Rimantas Barauskas, Audrius Nečiūnas, Martynas Patašius.

2016, vol. 18, iss. 8, p. 5321-5336

InfTechCtrl_45(3) 2016DOI

Highly convergent finite elements with diagonal mass matrix for short wave pulse propagation simulation

Andrius Kriščiūnas, Rimantas Barauskas.

2016, vol. 45, iss. 3, p. 308-320

InfTechCtrl_45(3) 2016DOI

Investigation of thermal properties of ceramic-containing knitted textile materials

Diana Kubilienė, Audronė Sankauskaitė, Aušra Abraitienė, Sigitas Krauledas, Rimantas Barauskas.

2016, Vol. 24, iss. 3, p. 63-66

Fibres and Textiles in Eastern Europe, 2016 iss.3(24).pdfDOI

Computational model of the heating system

Rimantas Barauskas, Valdas Grigaliūnas, Marius Gudauskis, Linas Obcarskas, Kastytis Kiprijonas Šarkauskas, Andrius Vilkauskas, Arūnas Žvironas.

2016, t. 22, Nr. 1, p. 19-24

Mechanika_2016_1(22)DOI

A finite element model in a form of structural dynamic equation for the transient analysis of pressure in pipelines

Rimantas Barauskas, Andrius Kriščiūnas, Tomas Blažauskas.

2016, vol. 18, iss. 2, p. 1209

JVE-2016-18-2

Multi-scale evaluation of the linear elastic and failure parameters of the unidirectional laminated textiles with application to transverse impact simulation

Dalia Čalnerytė, Rimantas Barauskas.

2016, vol. 142, p. 325-334

CompositeStructures 142(2016)p325-334DOI

A revised approach of human mastication function rehabilitation through monotypical mastication analysis

Gediminas Skirbutis, Algimantas Antanas Šurna, Rimantas Barauskas, Rimas Jonas Šurna, Alvydas Gleiznys.

2015, vol. 17, no. 1, p. 13-20

Stomatologija 2015 vol.17 N1 p.13-20.pdf

Thermal error analysis in precision length measurements

Aurimas Jakštas, Saulius Kaušinis, Rimantas Barauskas, Albinas Kasparaitis, Algimantas Barakauskas.

2014, Vol. 51, p. 133-146

Measurement vol 51 2014DOI

Influence of chemical surface modification of woven fabrics on ballistic and stab protection of multilayer packets = Audinių paviršiaus cheminio modifikavimo įtaka daugiasluoksnių paketų atsparumui šūviui ir dūriui

Diana Grinevičiūtė, Aušra Abraitienė, Audronė Sankauskaitė, Danutė-Marijona Tumėnienė, Laima Lenkauskaitė, Rimantas Barauskas.

2014, Vol. 20, iss. 2, p. 193-197

MatScience vol 20 N 2 2014DOI

Multi-resolution finite element models for simulation of the ballistic impact on non-crimped composite fabric packages

Rimantas Barauskas, Aušra Abraitienė.

2013, vol. 104, p. 215-229

Composite structures 104 (2013)DOI

Estimation of thermo-elastic damping of vibrations in micro-electro-mechanical systems resonators: finite element modeling

Saulius Kaušinis, Karl Yee, Rimantas Barauskas.

2012, Vol. 11, iss. 3, article 033005, p. 1-11

Journal of Micro/Nanolitography, MEMS and MOEMS, 2012, Vol. 11, iss. 3DOI

Experimental investigations and finite element model of heat and moisture transfer in multilayer textile packages

Rimantas Barauskas, Julija Baltušnikaitė, Aušra Abraitienė, Diana Grinevičiūtė.

2012, vol. 20, no. 6A(95), p. 112-118

FIBRES & TEXTILES in Eastern Europe, vol.20, N.6A(95),2012, pp.112-118

A model for numerical simulation of heat and water vapor exchange in multilayer textile packages with three-dimensional spacer fabric ventilation layer

Rimantas Barauskas, Aušra Abraitienė.

2011, Vol. 81, iss. 12, p. 1195-1215

TRJ_2011DOI

Investigation of dynamics-induced errors of long line scale calibration systems

Aurimas Jakštas, Saulius Kaušinis, Rimantas Barauskas, Albinas Kasparaitis, Algimantas Barakauskas.

Measurement vol 44 2011DOI

Optimization of ultrasound beam transmission path within measurement channel of ultrasonic flowmeter

Arminas Ragauskas, Vytautas Petkus, Paulius Borodičas, Ramutis Petras Bansevičius, Renaldas Raišutis, Rimantas Barauskas, Virgilijus Pamakštis.

2010, Vol. 12, iss. 4, p. 582-588

Vibroengineering (594) vol 12 Issue 4 2010

Influence of guiding tooth geometry on contact forces distribution in the human masticatory system: a FEM study = Vedančiojo danties geometrinės formos įtakos sąlyčio jėgų pasiskirstymui žmogaus kramtymo sistemoje tyrimas baigtinių elementų metodu

Gaivilė Pileičikienė, Algimantas Šurna, Gediminas Skirbutis, Rimantas Barauskas, Rimas Jonas Šurna.

2010, Nr. 3(83), p. 34-39

Mechanika_3(83) 2010

Coupling of zones with different resolution capabilities in finite element models of uniform structures = Skirtingos skiriamosios gebos zonų sujungimas tolydžiųjų struktūrų baigtinių elementų modeliuose

Rimantas Barauskas, Vidmantas Rimavičius.

2010, T. 39, nr. 1, p. 7-17

Inf Tech&Ctrl vol.39 N.1 2010

A new technique for the creation of a higher accuracy 3D geometrical model of the human masticatory system = Nauja tikslesnio žmogaus kramtymo sistemos trimačio geometrinio modelio sudarymo metodika

Gaivilė Pileičikienė, Algimantas Šurna, Gediminas Skirbutis, Rimas Jonas Šurna, Rimantas Barauskas.

2009, nr. 4(78), p. 44-50

Mechanika_4(78) 2009DOI

Investigation of thermo-elastic damping of vibrations of rectangular and ring-shaped MEMS resonators

Rimantas Barauskas, Saulius Kaušinis, H.A.C Tilmans.

2009, Vol. 11, no. 1, p. 177-187

Vibroengineering (445) vol.10 N.1 2009

Computational analysis and experimental investigation of heat and moisture transfer in multilayer textile package = Skaičiuojamoji daugiasluoksnio tekstilės medžiagų paketo šilumos ir drėgmės mainų analizė ir eksperimentinis tyrimas

Rimantas Barauskas, Lina Valasevičiūtė, Audronė Jurevičiūtė.

2009, Vol. 15, no. 1, p. 80-85

MatScience vol 15 N 1 2009

Finite element modeling of cooled-tip probe radiofrequency ablation processes in liver tissue

Rimantas Barauskas, Antanas Gulbinas, Tomas Vanagas, Giedrius Barauskas.

2008, vol. 38, iss. 6, p. 694-708

CompBiology&Medicine vol 38 2008temperature 20minlesion 20minDOI

Finite element analysis of stresses in the maxillary and mandibular dental arches and TMJ articular discs during clenching into maximum intercuspation, anterior and unilateral posterior occlusion

Gaivilė Pileičikienė, Algimantas Šurna, Rimantas Barauskas, Rimas Jonas Šurna, Algidas Basevičius.

2007, t. 9, Nr. 4, p. 121-128

Stomatologija 2007 vol 9 N4 2007.pdf

On parameters identification of computational models of vibrations during quiet standing of humans

Rimantas Barauskas, Radvilė Krušinskienė.

2007, Vol. 308, iss. 3-5, p. 612-624

JSV vol 308 2007DOI

Computational analysis of impact of a bullet against the multilayer fabrics in LS-DYNA

Rimantas Barauskas, Aušra Abraitienė.

2007, Vol. 34, iss. 7, p. 1286-1305

IJ Impact Engng vol 34 2007bullet hold-up 10 layersbullet shoot-through 5 layersfailure of a woven patchlead bullet against lead plateforming woven patch FE modelfailure of isothropic membraneDOI

3D Analysis of interaction of Lamb waves with defects in loaded steel plates

Rymantas Jonas Kažys, Liudas Mažeika, Rimantas Barauskas, Renaldas Raišutis, Vaidotas Cicėnas, Andriejus Demčenko.

2006, Vol. 44, suppl. 1, p. 1127-1130

Ultrasonics vol.44 2006DOI

Computer simulation of a piezoelectric angular rate sensor

Saulius Kaušinis, Rimantas Barauskas.

2006, Vol. 39, iss. 10, p. 947-958

Measurement vol 39 2006DOI

On highly convergent 2D acoustic and elastic wave propagation models

Rimantas Barauskas.

2006, Vol. 22, iss. 3, p. 225 - 233

CNME vol 22 2006Presentation

Highly convergent dynamic models obtained by modal synthesis with application to short wave pulse propagation

Rimantas Barauskas, Ramutė Barauskienė.

2004, Vol. 61, no. 14, p. 2536-2554

IJNME vol 61 2004Presentationgeneralized 240dofsynthesized 120dofsynthesized 60dofsynthesized 40dofconsistent 240doflumped 240dof

Evaluation of diffraction errors in precise pulse-echo measurements of ultrasound velocity in chambers with waveguide

Rymantas Jonas Kažys, Liudas Mažeika, Rimantas Barauskas, Elena Jasiūnienė, Vytautas Daniulaitis.

2002, Vol. 40, no. 1-8, p. 853-858

Ultrasonics vol 40 2002DOI

Temperature fields, exchanges and deformations of a precise length comparator microscope = Precizinio ilgio komparatoriaus mikroskopo temperatūriniai laukai ir deformacijos

Rimantas Barauskas, Albinas Kasparaitis, Saulius Kaušinis, Rimantas Lazdinas.

2011, T. 17, nr. 3, p. 279-283

Mechanika 17(3) 2011DOI

Reduction of finite element models by parameter identification = Baigtinių elementų modelių suprastinimas parametrų identifikavimo metodu

Rimantas Barauskas, Vidmantas Rimavičius.

2008, T. 37, nr. 3, p. 211-219

InfTechCtrl_37(3) 2008

Investigation of vibrations of line scale calibration systems

Saulius Kaušinis, Algimantas Barakauskas, Rimantas Barauskas, Aurimas Jakštas, Albinas Kasparaitis.

2008, Vol. 10, no. 1, p. 79-89

Measurement vol 44 2011DOI

Finite element modeling and experimental investigation of infiltration of sodium chloride solution into nonviable liver tissue = Natrio chlorido tirpalo infiltracijos į negyvą kepenų audinį matematiniai ir eksperimentiniai tyrinėjimai

Rimantas Barauskas, Antanas Gulbinas, Giedrius Barauskas.

2007, T. 43, nr. 5, p. 399-411

Medicina_43(5) 2007DOI

Finite element analysis of thermo-elastical modal damping of MEMS vibrations

Rimantas Barauskas, Saulius Kaušinis, Ingrid De Wolf, S. Stoffels, H.A.C Tilmans.

2007, Vol. 9, no. 2, p. 21-33

Vibroengineering Vol.9 N.2 2007

Investigation of radiofrequency ablation process in liver tissue by finite element modeling and experiment = Radijo dažninės kepenų audinio destrukcijos procesų matematiniai ir eksperimentiniai tyrinėjimai

Rimantas Barauskas, Antanas Gulbinas, Giedrius Barauskas.

2007, T. 43, nr. 4, p. 310-325

Medicina_43(4) 2007DOI

Parametric sensitivity of MEMS-gyro

Saulius Kaušinis, Rimantas Barauskas.

2006, Vol. 113, p. 495-499

SolidStatePhenomena vol 113 2006 p495-499

Dynamic analysis of structures with unilateral constraints: numerical integration and reduction of structural equations = Konstrukcijų su vienpusiais ryšiais dinamikos tyrimas

Rimantas Barauskas.

1994, Vol. 37, no. 2, p. 323-342

IJNME vol 37 1994.pdf